Zurück zu WIZnet

WIZnet W6300-EVB-Pico Evaluation Boards

WIZnet W6300-EVB-Pico Evaluation Boards are based on Raspberry Pi microcontrollers (MCUs) and the W6300 fully hardwired TCP/IP controllers. The W6300-EVB-Pico features the Raspberry Pi RP2040 MCU, while the W6300-EVB-Pico2 utilizes the Raspberry Pi RP2350 MCU. These WIZnet W6300-EVB-Pico evaluation boards work the same as the Raspberry Pi Pico board but with additional Ethernet via the W6300.

Features

  • W6300-EVB-Pico
    • RP2040 microcontroller with 2MByte Flash
      • Dual-core Cortex® M0+ at up to 133MHz
      • 264kByte multi-bank high-performance SRAM
      • External Quad-SPI Flash with eXecute In Place (XIP)
      • High-performance full-crossbar bus fabric
      • 30x multi-function general-purpose I/O [4x can be used for the Analog-to-Digital Converter (ADC)], 1.8V to 3.3V I/O voltage range (NOTE: Pico I/O voltage is fixed at 3.3V)
      • 12-bit 500ksps ADC
      • Various digital peripherals - 2x UART, 2x I2C, 2x SPI, 16x PWM channels, 1x timer with 4x alarms, 1x real time counter
      • 2x Programmable I/O (PIO) blocks, 8x state machines total
      • Flexible, user-programmable high-speed I/O
      • Can emulate interfaces such as an SD card and VGA
    • Includes W6300
      • Supports TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, and PPPoE hardwired internet protocols
      • Supports 8x independent SOCKETs simultaneously with 32KB memory
      • Internal 16Kbytes Memory for TX/ RX buffers
      • SPI interface
    • Micro-USB B port for power and data (and for reprogramming the Flash)
    • 40-pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins, also with edge castellations
    • 3-pin Arm® Serial Wire Debug (SWD) port
    • 10/100 Ethernet PHY embedded
    • Supports auto negotiation (full/half duplex and 10/100-based)
    • Built-in RJ45 (RB1-125BAG1A)
    • Built-in LDO (LM8805SF5-33V)
  • W6300-EVB-Pico2
    • RP2350 microcontroller with integrated 16Mbit Flash
      • Symmetrical dual Arm Cortex-M33 cores at up to 150MHz
      • 520kByte multi-bank high-performance SRAM
      • External Quad-SPI Flash with eXecute In Place (XIP) capabilities
      • Enhanced performance full-crossbar bus fabric
      • Up to 48x multi-function general-purpose I/O (8x can be used for ADC on RP2350-B), 1.8V to 5.0V I/O voltage range
    • Security
      • One Time Programmable (OTP) memory -used for boot configuration and secure key storage
      • Secure Boot - ensures that only authenticated software can run on the device, utilizing OTP for key verification
      • Arm TrustZone Technology - provides hardware isolation between secure and non-secure software, enhancing security for critical applications
    • Analog and digital peripherals
      • 12-bit 500ksps ADC
      • 2x UART, 2x I2C, 2x SPI, 16x PWM channels
      • 1x timer with 4x alarms, 1x real time counter
      • 3x Programmable I/O (PIO) blocks, 12x state machines total
      • Flexible, user-programmable high-speed I/O
      • Can emulate interfaces such as an SD card and VGA
    • W6300 Ethernet controller
      • Supports TCP, UDP, IPv6, IPv4, ICMPv6, ICMPv4, IGMP, MLDv1, ARP, and PPPoE Hardwired TCP/IP protocols
      • Supports IPv4/IPv6 dual stack
      • Supports 8x independent SOCKETs simultaneously with 64KB memory
      • Supports SOCKET-less command [ARP, PING, ICMPv6 (PING, ARP, DAD, NA, RS) command for IPv6 auto-configuration and network monitoring]
      • Supports Ethernet power down mode and system clock switching for power save
      • Supports wake on LAN over UDP
      • Supports serial/parallel host interface [high-speed QSPI (MODE 0/3), system Bus with 2x address signals and 8-bit data]
      • Internal 32Kbytes memory for TX/ RX buffers (total 64Kbytes memory)
      • Integrated 10BaseT / 10BaseTe / 100BaseTX Ethernet PHY
      • Supports auto negotiation (full and half duplex, 10-/100-based)
      • Supports Auto-MDIX only on auto-negotiation mode
      • Does not support IP fragmentation
      • 3V operation with 5V I/O signal tolerance
      • Network indicator LEDs (full/half duplex, link, 10/100 speed, and active)
      • 48-pin LQFP and QFN lead-free package
    • Connectivity
      • USB Type-C® port for power and data (and for reprogramming the Flash)
      • 40-pin 21x51 'DIP' style 1mm thick PCB with 0.1" through-hole pins, also with edge castellations
      • 3-pin Arm Serial Wire Debug (SWD) port
    • Networking
      • Embedded 10/100 Ethernet PHY
      • Supports auto negotiation [full/half duplex (10/100-based)]
      • Built-in RJ45 (RB1-125BAG1A)

Applications

  • Home network devices
    • Set-top boxes
    • PVRs
    • Digital media adapters
  • Serial-to-Ethernet
    • Access control
    • LED displays
    • Wireless AP relays
  • Parallel-to-Ethernet
    • POS / mini printers
    • Copy machines
  • USB-to-Ethernet
    • Storage devices
    • Network printers
  • GPIO-to-Ethernet (home network sensors)
  • Security systems
    • DVR
    • Network cameras
    • Kiosks
  • Factory and home automation
  • Medical monitoring equipment
  • Embedded servers
  • IoT devices
  • IoT cloud devices

Specifications

  • 5VDC ±10% Bus voltage
  • 4.3VDC to 5.5VDC main system input voltage range
  • -20°C to +85°C operating temperature range, including self-heating
  • +70°C recommended maximum ambient temperature of operation

Datasheets

Design Support

Resources

Dimensions (mm)

Mechanical Drawing - WIZnet W6300-EVB-Pico Evaluation Boards

Related Products

WIZnet W6300 Hardwired Dual TCP/IP Stack Controllers

Internet controllers that support Quad SPI, which can maximize 100Mbps Ethernet communication speed.

Learn Moreüber WIZnet W6300 Hardwired Dual TCP/IP Stack Controllers View Productsverwandt mit WIZnet W6300 Hardwired Dual TCP/IP Stack Controllers

Raspberry Pi RP2040 Mikrocontroller-Chips

Großer On-Chip-Speicher, symmetrischer Dual-Core-Prozessorkomplex, deterministische Busstruktur und vieles mehr.

Learn Moreüber Raspberry Pi RP2040 Mikrocontroller-Chips View Productsverwandt mit Raspberry Pi RP2040 Mikrocontroller-Chips

Raspberry Pi RP2350 Mikrocontroller (MCUs)

Basiert auf Arm Cortex®-M33- oder Hazard3 RISC-V-Dual-Prozessoren bei 150 MHz.

Learn Moreüber Raspberry Pi RP2350 Mikrocontroller (MCUs) View Productsverwandt mit Raspberry Pi RP2350 Mikrocontroller (MCUs)
Veröffentlichungsdatum: 2025-07-18 | Aktualisiert: 2025-07-31