Alle Ergebnisse (1.593)

Auswählen Bild Teile-Nr. Herst. Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern. Menge RoHS
Marki Microwave Signalaufbereitung The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth. 134Auf Lager
248,89 €
207,41 €
Min.: 1
Mult.: 1
Marki Microwave PD-0530SMG
Marki Microwave Signalaufbereitung 4Auf Lager
157,35 €
Min.: 1
Mult.: 1
Marki Microwave RF-Entwicklungstools The EVB-MFBP-00081 is a connectorized evaluation board for the MFBP-00081CSP3 passive MMIC surface mount 11.99-13.94 GHz bandpass filter. 2Auf Lager
618,18 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave Signalaufbereitung The MFLP-00023CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00023CSP1 features a 2.6 GHz 3 dBc cutoff and 28 dB passband return loss. 25Auf Lager
114,16 €
95,14 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung The ABSD-10169PSM is a GaAs active MMIC balun in a 3mm QFN surface mount package. Its frequency ranges from DC to 30 GHz and offers 9 dB single ended to differential gain (low end limited by DC block). 15Auf Lager
125,19 €
104,33 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design. 32Auf Lager
250erwartet ab 05.02.2027
132,31 €
110,25 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung The MFBP-00099PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00099PSM features a 9.0-10.4GHz 1dBc passband and 2.8dB center frequency insertion loss. 25Auf Lager
114,16 €
95,14 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm. 360Auf Lager
72,27 €
60,23 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range. 2Auf Lager
775,05 €
Min.: 1
Mult.: 1
Marki Microwave EVB-MFBP-00152
Marki Microwave RF-Entwicklungstools MMIC, 12-16 GHz Bandpass Filter, CSP3, QFN mounted into evaluation board (2.92mm-F) 2Auf Lager
623,75 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave Signalaufbereitung The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00080CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package. 15Auf Lager
114,16 €
95,14 €
Min.: 1
Mult.: 1

Marki Microwave RF-Entwicklungstools The EVB-MDPX-00004P is a connectorized evaluation board for the MDPX-00004PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 6 GHz and high frequency 8 to 28 GHz signals. 1Auf Lager
618,18 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave EVB-MFBP-00138P
Marki Microwave RF-Entwicklungstools The EVB-MFBP-00138P is a connectorized evaluation board for the MFBP-00138PSM passive MMIC surface mount 11.0-17.5GHz bandpass filter. 2Auf Lager
618,18 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave Dämpfer The ATN02-0070CSP1 is a surface mount GaAs MMIC attenuator in a chip scale package (CSP). The ATN02-0070CSP1 features a typical 2.1 dB attenuation with 0.1 dB attenuation flatness and 25 dB return loss across the DC-70 GHz bandwidth. 10Auf Lager
410erwartet ab 19.02.2027
18,07 €
17,91 €
17,47 €
Min.: 1
Mult.: 1

Marki Microwave RF-Entwicklungstools The EVB-MDPX-00007P is a connectorized evaluation board for the MDPX-00007PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 12 GHz and high frequency 14 to 28 GHz signals. 1Auf Lager
618,18 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave Signalaufbereitung The MPD4-0R404CSP2 is a small footprint MMIC 0.4-4 GHz 4-Way power divider/power splitter featuring high 20 dB isolation and 3.4 dB insertion loss in our compact CSP2 chip scale package. 25Auf Lager
50erwartet ab 07.12.2026
70,53 €
58,78 €
Min.: 1
Mult.: 1
Marki Microwave RF-Entwicklungstools The EVB-MPD4-0R404 is a connectorized evaluation board for the MPD4-0R404CSP2 MMIC 0.4-4 GHz 4-Way power divider/power splitter. 1Auf Lager
540,01 €
Min.: 1
Mult.: 1
Max.: 5
Marki Microwave Signalaufbereitung The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package. 25Auf Lager
200erwartet ab 05.02.2027
178,81 €
149,01 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung The BTM-0026PSM-2 is a packaged miniature bias tee featuring excellent 0.4 dB insertion loss and superior 25 dB isolations over a broad 10 MHz to 26 GHz bandwidth. The BTM-0026PSM-2 works well for K-Band applications.
25erwartet ab 03.02.2027
56,65 €
47,21 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung The MFBP-00060PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00060PSM is available as a 5x5mm plastic QFN. 25Auf Lager
114,16 €
95,14 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung The MPD-0422SCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package. 157Auf Lager
54,00 €
45,00 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung The MFBC-00003PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBC-00003PSM is available as a 5x5mm plastic QFN. 17Auf Lager
114,16 €
95,14 €
Min.: 1
Mult.: 1
Marki Microwave Signalaufbereitung The MMD-0415HPSM is a MMIC doubler fabricated with GaAs Schottky diodes. This part operates over a 2 to 7.5 GHz input frequency range or a doubled output frequency range of 4 to 15 GHz. 70Auf Lager
82,48 €
68,73 €
Min.: 1
Mult.: 1
Marki Microwave HF-Mixer The MM1-0222HSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222HSM works well as both an up and down converter through Ku band and beyond. 259Auf Lager
151,33 €
126,11 €
Min.: 1
Mult.: 1
Marki Microwave HF-Mixer The MM1-0222LSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222LSM works well as both an up and down converter through Ku band and beyond. 476Auf Lager
168,32 €
140,27 €
Min.: 1
Mult.: 1