Alle Ergebnisse (1.209)

Auswählen Bild Teile-Nr.
 Herst.
Beschreibung Datenblatt Verfügbarkeit Preis (EUR) Ergebnisse in der Tabelle nach dem Einheitspreis bei Ihrer Menge filtern.
Menge RoHS
Marki Microwave Signalaufbereitung MMIC Doubler Output 20-50 GHz, +10 to +15 dBm, 3mm QFN
Datenblatt
12Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Mixer The MM1-0626SSM is a highly linear passive GaAs double balanced MMIC mixer suitable for both up and down-conversion applications.
Datenblatt
12Auf Lager
25erwartet ab 09.09.2026
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker A high-linearity low noise amplifier capable of providing 15.5 dB gain, 2 dB noise figure and +26 dBm OIP3 up to 10 GHz. The amplifier is suitable for use in RF front-ends requiring low noise, high gain and excellent signal fidelity.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Entwicklungstools The EVAL-MM1-0626H is a connectorized evaluation board for the MM1-0626HSM passive MMIC Surface mount 6 - 26.5 GHz double balanced mixer.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Entwicklungstools EVAL-MMIQ-0416L is a connectorized evaluation board for the MMIQ-0416LSM-2 Low LO Drive MMIC surface mount 4 - 16 GHz IQ Mixer.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Entwicklungstools The EVAL-MT3L-0113H is a connectorized evaluation board for the MT3L-0113HM passive MMIC Surface mount 1.5 - 13 GHz High Dynamic Range Mixer.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-20PSM is a high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-20GHz bandwidth. It offers low insertion loss and excellent return loss from DC through K band and has a typical 1 dB compression point of 15 dBm.
Datenblatt
5Auf Lager
125erwartet ab 31.12.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
Datenblatt
4Auf Lager
20erwartet ab 24.11.2026
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BT-0010SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 10 GHz bandwidth.
Datenblatt
8Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MM1-1044H is a GaAs MMIC double balanced mixer that is designed for and operates at the K and Ka band 5G frequencies. MM1-1044H is a high linearity Ka band mixer that works well as both an up and down converter.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.
Datenblatt
1Auf Lager
2erwartet ab 23.09.2026
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN2-0026 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Datenblatt
1Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The BT-0026SMG is a packaged bias tee featuring excellent insertion loss and superior isolations over a broad 20 MHz to 26 GHz bandwidth.
Datenblatt
7Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm.
Datenblatt
2Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MMD-0415HPSM is a MMIC doubler fabricated with GaAs Schottky diodes. This part operates over a 2 to 7.5 GHz input frequency range or a doubled output frequency range of 4 to 15 GHz.
Datenblatt
25Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MPDR-0070CSP2 is a small footprint mmWave MMIC DC-70 GHz 2-Way resistive power divider/power splitter featuring low 1.5 dB insertion loss in our compact CSP2 chip scale package. It is much smaller than a printed PCB Power Divider/Combiner.
Datenblatt
25Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker A broadband, efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. It is designed to provide optimal LO drive for T3 mixers and offers 13 dB typical gain and 20 dBm typical saturated output power for 165 mA of current.
Datenblatt
21Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Mixer The MM1-0212HSM is a GaAs MMIC double balanced mixer that is optimized for low frequency applications. MM1-0212HSM is a low frequency S band mixer that works well as both an up and down converter through X band.
Datenblatt
41Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Mixer The MMIQ-0218LSM is a broadband passive GaAs MMIC IQ mixer that operates across an unrivaled 2-18 GHz RF/LO band with an IF from DC to 3 GHz.
Datenblatt
25Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung MPD-0226SM is a MMIC 2-way Wilkinson power divider. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MPD-0226SM is available as a 4 X 4 mm QFN package.
Datenblatt
50Auf Lager
Min.: 1
Mult.: 1

Marki Microwave HF-Verstärker The ADM2-0035PA is an LO driver amplifier module with 2 internally connected wideband gain stages and equalization. It is designed to provide sufficient gain and output power for Marki S-diode mixers below 35 GHz with an input power of 0-5 dBm.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1

Marki Microwave RF-Adapter - Abgang The BTN-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Datenblatt
5Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter.
Datenblatt
4Auf Lager
Min.: 1
Mult.: 1

Marki Microwave Signalaufbereitung The MM2-0530H is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530H is available as a wire bondable chip or connectorized SMA package.
Datenblatt
3Auf Lager
Min.: 1
Mult.: 1